All bearings are manufactured to the tolerence 
set by (ABEC) of the (AFBMA) and (ISO). 
Total bearing quality and fitness 
for use are strungently adhered to.
TYPES OF BEARINGS
BALL BEARINGS
  Type Advantages Varations
1.Radial Ball Bearing The most popular bearing to be used in a wide range of operating conditions from the simplest to the most complex. Designed to carry both radial and axil loads from either direction at relatively high speeds. Easy for fitting and maintenance Maximun capacity for primarily radial loading. Prelubricated single/double shielded types. Bearings with snap ring groove.
     
2.Angular Contact Ball Bearing Designed for combinations loading with high thrust capacity in one direction Rapid and effecient oil circulation. Cage materials and designs.
     
3.FourPoint Ball Bearing Designed to carry high thrust loads in both directions and moderate radial load. Split ring enables a larger compliment of balls to be fitted thus giving a high basic load rating. Outer assmebly can be mounted independently of inner ring. Cage design. Snap ring groove.
       
ROLLER BEARINGS
  Type   Advantages   Varations
1.Spherical Roller Bearings   Self aligning wiht high radial and thrust capabilities accomadate dynamic misalignment due to shaft deflection, housing distortion or alighnment. Bearings incorporate new designs which resulted in improved performance.   Oil grooves and holes, straight or tapered bore - internal clearances accomadate operating conditions
         
2.Barrel Roller Bearings: Angular Contact Tpye   Designed for combined loads and can take care of misalignemnt. Inner and outer races are separted from cage and roller assembly and thus easy to install.    
         
3.Taper Roller Bearing   Particularly suitable for carring combined (radial and axil) loads. Seperable design cup and cone with cage and rollers assmebly can be mounted seperately  

Taper Angle
         
4.Cylinder Roller Bearings   Suitable for high radial loads and capable of operating at high speeds   With or wihtout inner ring / outer ring. Two Flanges on inner ring. Two flanges on outer ring, one internal and one loose flange on inner ring. One flange on outer ring, two flanges on inner ring. Snap ring groove. Full compliment roller bearing. Caeg design
           

NEEDLE ROLLER BEARING
Using cages and needles manufactured from special steel and accurate sizes  these bearings are engineered to give a long life.
  Type   Advantages   Varations
1.Needle cage / Needle roller and cage assmebles   High capacity with lowest possible croos section in a unit assmebly used with hardened and ground raceway. Very easy to install. can be fitted by hand without the use of tools. Very economical bearing arrangement.   Steel cages. Unit or split assmebly with rollers sorted in 2 pm groups and identifing colour codes on package. Design: Standard cage ; cage - inner centred on shaft ; cage - outer centred in the housing. Welded / one piece construction.
         
2.Roller cages non ferrous   Designed for high load carrying capacity. Smooth running, low fractional resistance, easy to install. Normally cages are outer centred in the housing   Material : Brass / Aluminium Bronze
         
3.Needle Roller Bearings : Cage guided needles   Machines and ground outer ring provides high capacity and shock resistance   With or withour outer ring. Controlled internal clearance.
           
OUR RANGE
Ball Bearings Deep Groove Single Row
Series: 6000 6200 6300 6400                
  16000 - - -                
61800 61900 - -                
62000 62300 - -                
63000 - - -                
98200 98300 99200 -                
RLS RMS                    
                                 
Ball Bearings For European Vehicles
Cylindrical Roller Bearings
Series:   N   200   300   400 - - - -
    NU   200   300   400 1000 2200 2300 4900
    NUP   200   300   2200 2300 - - -
    NJ   200   300   400 2200 2300 - -
    NN   3000   300   - - - - -
    NNU   4900   300   - - - - -
    CRL   CRM                
                                 
Thrust Bearings
Series:   51100   51200                        
    51300   -                        
    52200   52300                        
    53200   -                        
    54300   54400                        
                                 
Tappered Roller Bearing
Series:   30200   30300   -                    
    31300   -   -                    
    32000   32200   -                    
    32300   32900   -                    
    33000   33100   33200                    
                                 
Cup Cone Roller Bearing
Series   Maximum Cup Diameter = 170 mm
 
Ball Bearings / Sleeves From Pillow Block
Series:   UCFL, UCP, UCT, UCR & bearing UC

WE ALSO MANUFACTURE
  1. Bearing Sleeve Assy
  2. King Pin Bearings